Nissan D21 Hood Strut Kit

from $41.99

PLEASE READ ALL OF THE FOLLOWING BEFORE PLACING YOUR ORDER!

This kit takes the headache and multiple trips to the parts store out of the equation! We did all the hard work for you so its as simple as a 30 min install!

You will be required to drill 4 new holes in the fenders for the lower mounting brackets using the supplied template, the upper mounting brackets use the existing hood mounting locations!

MODIFICATIONS ARE REQUIRED TO RUN THE OEM WINSHIELD FLUID RESERVOIR!

Complete Kit Features:

  • CNC Plasma Cut, CNC Bent

  • X4 11g P+O steel brackets

  • X1 18g steel Drill template

  • X2 Gas Struts

  • Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts, x4 ball studs, x4 5/16 nuts, x4 5/16 washers )

  • BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

Bracket Kit Features:

  • Cnc plasma cut, Cnc bent

  • X4 11g P+O steel brackets

  • X1 18g steel Drill template

  • Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts )

  • BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

  • BRACKET KIT DOES NOT INCLUDE GAS STRUTS NOR BALL STUDS!

  • We recommend 14” extended struts that are at least 50lb capacity per strut

DISCLAIMERS:

  • THIS KIT MAY REQUIRE RELOCATION OF FACTORY COMPONENTS!!

  • THIS KIT IS DESIGNED FOR FACTORY STEEL HOODS!! USE ON FIBERGLASS, CARBON FIBER OR OTHER

    LIGHT WEIGHT HOODS MAY CAUSE DAMAGE!!

  • ROHDE FABRICATION DOES NOT WARRANTY GAS STRUTS SUPPLIED WITH OUR KITS!!!

Kit Type:
Quantity:
Add To Cart

PLEASE READ ALL OF THE FOLLOWING BEFORE PLACING YOUR ORDER!

This kit takes the headache and multiple trips to the parts store out of the equation! We did all the hard work for you so its as simple as a 30 min install!

You will be required to drill 4 new holes in the fenders for the lower mounting brackets using the supplied template, the upper mounting brackets use the existing hood mounting locations!

MODIFICATIONS ARE REQUIRED TO RUN THE OEM WINSHIELD FLUID RESERVOIR!

Complete Kit Features:

  • CNC Plasma Cut, CNC Bent

  • X4 11g P+O steel brackets

  • X1 18g steel Drill template

  • X2 Gas Struts

  • Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts, x4 ball studs, x4 5/16 nuts, x4 5/16 washers )

  • BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

Bracket Kit Features:

  • Cnc plasma cut, Cnc bent

  • X4 11g P+O steel brackets

  • X1 18g steel Drill template

  • Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts )

  • BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

  • BRACKET KIT DOES NOT INCLUDE GAS STRUTS NOR BALL STUDS!

  • We recommend 14” extended struts that are at least 50lb capacity per strut

DISCLAIMERS:

  • THIS KIT MAY REQUIRE RELOCATION OF FACTORY COMPONENTS!!

  • THIS KIT IS DESIGNED FOR FACTORY STEEL HOODS!! USE ON FIBERGLASS, CARBON FIBER OR OTHER

    LIGHT WEIGHT HOODS MAY CAUSE DAMAGE!!

  • ROHDE FABRICATION DOES NOT WARRANTY GAS STRUTS SUPPLIED WITH OUR KITS!!!

PLEASE READ ALL OF THE FOLLOWING BEFORE PLACING YOUR ORDER!

This kit takes the headache and multiple trips to the parts store out of the equation! We did all the hard work for you so its as simple as a 30 min install!

You will be required to drill 4 new holes in the fenders for the lower mounting brackets using the supplied template, the upper mounting brackets use the existing hood mounting locations!

MODIFICATIONS ARE REQUIRED TO RUN THE OEM WINSHIELD FLUID RESERVOIR!

Complete Kit Features:

  • CNC Plasma Cut, CNC Bent

  • X4 11g P+O steel brackets

  • X1 18g steel Drill template

  • X2 Gas Struts

  • Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts, x4 ball studs, x4 5/16 nuts, x4 5/16 washers )

  • BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

Bracket Kit Features:

  • Cnc plasma cut, Cnc bent

  • X4 11g P+O steel brackets

  • X1 18g steel Drill template

  • Hardware Kit ( x4 m6 bolts, x4 m6 washers, x4 m6 nuts )

  • BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

  • BRACKET KIT DOES NOT INCLUDE GAS STRUTS NOR BALL STUDS!

  • We recommend 14” extended struts that are at least 50lb capacity per strut

DISCLAIMERS:

  • THIS KIT MAY REQUIRE RELOCATION OF FACTORY COMPONENTS!!

  • THIS KIT IS DESIGNED FOR FACTORY STEEL HOODS!! USE ON FIBERGLASS, CARBON FIBER OR OTHER

    LIGHT WEIGHT HOODS MAY CAUSE DAMAGE!!

  • ROHDE FABRICATION DOES NOT WARRANTY GAS STRUTS SUPPLIED WITH OUR KITS!!!

Nissan D21 Fender Splash Guards ( 86.5 - 97 )
Nissan D21 Fender Splash Guards ( 86.5 - 97 )
from $41.99
processed_e6ff8c2fe239480a900ff5593b16bb35.jpeg
Nissan D21 Weber Spring Return Bracket
Sale Price:$14.99 Original Price:$19.99
sale
DOOR PROP 10.jpg
Nissan Door Props
from $35.99
D21 HOOD VENT INNER.jpg
Nissan D21 Inner Hood Vents
from $45.99
D21 HOOD VENT OUTER.jpg
Nissan D21 Outer Hood Vents
from $45.99