Toyota Tacoma Hood Strut Kit ( 1st Gen )

PLEASE READ ALL OF THE FOLLOWING BEFORE PLACING YOUR ORDER!

Fits 1st Gen Toyota Tacoma 1995 - 2004

This kit takes the headache and multiple trips to the parts store out of the equation! We did all the hard work for you so its as simple as a 30 min install!

You will be required to drill 2 new holes in the fenders for the lower ball studs using the supplied template, the upper mounting brackets use the existing hood holes!

MODIFICATIONS ARE REQUIRED TO RUN THE OEM CRUISE CONTROL BOX!

Complete Kit Features:

• Cnc plasma cut, Cnc bent

• X2 11g P+O steel brackets

• X1 18g steel Drill template

• X2 Gas Struts

• Hardware Kit ( x4 m5 bolts, x4 m5 washers, x4 m5 rivet nuts, x4 ball studs, x2 5/16 nuts, x2 5/16 washers, x2 5/16 rivet nuts, x4 lower gusset washers )

• BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

Bracket Kit Features:

• Cnc plasma cut, Cnc bent

• X2 11g P+O steel brackets

• X1 18g steel Drill template

• Hardware Kit ( x4 m5 bolts, x4 m5 washers, x4 m5 rivet nuts, x2 5/16 rivet nuts, x4 lower gusset washers )

• BRACKETS ARE RAW UNCOATED, INSTALLER NEEDS TO COAT BRACKETS TO AVOID CORROSION!!

• BRACKET KIT DOES NOT INCLUDE GAS STRUTS NOR BALL STUDS!

• We recommend 20” extended struts that are at least 25lb capacity per strut

>> Optional Hardware Kits <<

Cruise Control Mod

• X2 button head bolts, X2 fender washers

Rivet Nut Install Hardware

• x1 5/16 bolt, x1 5/16 nut, x1 5/16 washer

• x1 5mm bolt, x1 5mm nut, x1 5mm washer

DISCLAIMERS:

• THIS KIT MAY REQUIRE RELOCATION OF FACTORY COMPONENTS!!

• THIS KIT IS DESIGNED FOR FACTORY STEEL HOODS!! USE ON FIBERGLASS, CARBON FIBER OR OTHER

  LIGHT WEIGHT HOODS MAY CAUSE DAMAGE!!

• ROHDE FABRICATION DOES NOT WARRANTY GAS STRUTS SUPPLIED WITH OUR KITS!!!